100" Ultima Engine
250mm Rear Tire
6 Speed Transmission
Dual hidden shocks
38 degree rake with 5 over in triple tree
Custom seat, exhaust, grips, way to much to list
have to be seen to truly appreciate, many extras go with the bike. Feel free to contact me with any question about the bike. Complete service just performed by local chopper shop in preparation for the upcoming riding season.
25Four46Six524Seven, Ask for Ben
$16,000 invested, asking $9,000
Custom Chopper for Sale. Built in 2014 by Wilkes County Choppers and never ridden. Chopper has an S&S Evolution Model 96 inch Engine with 3 5/8 bore and 4 5/8 stroke on flywheel. 1573ccs with Python starter and top of the line everything. Asking $55,000.
PYO 2006 Chopper - $11,500.
Paul Yaffe Originals: Built 2001 / Was Rebuilt and refurbished by Chopper Kings LLC 2006- Show Bike Winner: for sale by 3rd owner. Based on #PB1-CH (Chopper Chassis for TC-88 B drive train) is has been raked to the tune of 48 degrees + 6 degree trees and has a 15 over front end. It is comes to life with a TC 88 B drive train that has been muscled up with a 95 in kit with cams and ported heads, dozens of totally cool one-off parts. The original flat black paint was changed to the current Paint Shop Bike theme "Resurrection", the owner and painter, was PYO's in house paint shop for quite a few years. The entire bike has been treated to a Brushed Nickel bath, which gives it an incredible antique look. The Paint Shop Bike "Resurrection" ready to kick it's new owners life into high gear! Act fast...Own a piece of CHOPPER History, $11,500.00 Ernie
Feeling a little sluggish? Tired and short on energy? TRY THIS Testosterone supplement, it's sure to be the cure! Big inch S&S Super Sidewinder power is sure to perk you up instantly! Light lay-down on the right side as shown, runs and rides great (FAST), 16,000 miles....... $7,550.
I have a tnt custom chopper for sale. She has a 113 super sidewinder Moter with a 6 speed baker tranny , springer front end , 250 rear tire she sits at 9' long , had a new paint last summer 8 months ago replaced cluch with a b&b dry cluch she has an open primary clear title 2004 frame 2014 Moter NO EMAIL NO SCAMS I know what I have so serious calls only
The pictures speak for themselves. Nothing was spared in this build. Ultima 6 speed transmission, el Bruno 127ci engine, Ultima rigid frame, the list goes on and on. Runs and drives perfectly. This is a wicked fast motorcycle. This is not for beginners, and NO joy rides. Please have cash on hand to ride. Thanks. It's ready for spring and summer. Tiltle in hand.
Chance to buy at discounted price. This bike has all the goodies from the 70's:
Narrow Springer fork - nice shape
Plunger frame AKA the Machine Shop
Fish tail exhaust
Original oil tank for plunger frame - nice shape
1975 Guages from Harley Davidson Superglide
Banana caliper rear
S&S 103 cu in panhead with STD heads - automatic decompression valves
Stretched tanks (flatside)
Lot of custom chromed brackets
Primo-Rivera Belt Primary drive
USA rotary 4 speed
Bike is 97% together - chance to buy at discounted price. Once complete price will go up considerably.
Shop too small and have too many projects.
Here is what is left:
Hoses for gas ( have not put gas in yet so shop does not stink).
Bracket for front fender (or remove which was more common in the 70's)
mount chain guard
Rebuild and mount vintage dual front calipers - have already been re-chromed
tires are vintage and should be replaced if riding for any distance - Speed grip for rear
Motor has approximately 1000 miles. I drove and tested on bike removed from prior to putting on this chopper. I have since added electronic ignition (crane) with single fire coil and wires also. this has not been tested as do not want to gas up until ready to go (stink up shop). I do have spare unit but if this one does not work I will go with new unit.
It is wired with fuse block and most wiring has been tested.
Have leather tool bag not shown in pictures - (easy rider style)
Next time this is listed, it will be complete at much higher price.
Please let me know if you have any questions and/or concerns.